Rimbey Implements LTD

  • 5410 43rd Street
  • Rimbey, AB T0C 2J0
  • Call Us: (403) 843-3700
  • https://www.rimbeyimplements.ca/
Print This Page

2024 Toro Groundsmaster® 3500 Series 3500-D (30807)

Information

2024 Toro Groundsmaster® 3500 Series 3500-D (30807)

The Groundsmaster® 3500 Series is a revolutionary triplex rotary mower designed for superior performance trimming. The free-floating Contour™ Plus cutting decks allow mowing of undulating terrain without scalping. The powerful engine and exclusive traction drive system, gets the mowing job done quickly.

Features may include:

Time Saving
  • Unlike any other mower on the market, the Groundsmaster® 3500-D allows you to be more productive. The 68" (173 cm) width-of-cut allows you to mow generous swaths, yet its compact size and the Sidewinder® system also allow you to make tight maneuvers in trim areas. Locations normally requiring two different machines can be handled by one.
Superior Traction
  • The unique Toro Series/Parallel™ traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimizing tire spinouts and scuffing.
Sidewinder® Cutting Unit System
  • Sidewinder cutting units shift left and right a total of 24 inches (61 cm). This allows the tire tracks to be shifted within the mowing path to reduce wear on the turf.
Quality of Cut
  • The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power. A unique directional vane and modified discharge opening deliver even clipping dispersion.
Scalp-Free Mowing
  • The ground-following design of each Contour™ Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.

Photos

Highlights

  • Rimbey, Alberta
  • 2024
  • Toro
  • Groundsmaster® 3500 Series 3500-D (30807)
  • Diesel / Biodiesel
  • Available
  • 76" (193 cm) with ROPS | of Cut: 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm)

Specifications

  • 2024
  • Toro
  • Groundsmaster® 3500 Series
  • 3500-D (30807)
  • Riding
  • Kubota®
  • 3-cylinder
  • 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm
  • 71.5 (52.7) Nm (lbs-ft) @ 2200 rpm
  • 1123cc
  • EPA Tier IV Final and Stage V compliant.
  • Liquid Cooled
  • Key Start
  • Remote-mounted 5" Donaldson® air cleaner
  • Rear axle with hydraulic steering. Adjustable tilt steering wheel with 22/3 turns lock to lock.
  • 3WD
  • Diesel / Biodiesel
  • 12V
  • 12-volt 585 CCA battery and 40 amp alternator
  • 20" x 12" - 10", 4-ply, Turf Tread
  • 20" x 10" - 10", 4-ply, Turf Tread
  • Mowing Rate (Productivity): Up to 4.1 acres/hr (1.7 hectacres/hr)
  • Ground Forward / Reverse: 0 - 9 mph (0 - 14 km/h) / 0 - 4 mph (0 - 6.4 km/h) | Mowing: 0 - 6 mph (0 - 10 km/h)
  • Formed steel, welded steel and steel tubing
  • Ground Following: 6" (15.3 cm) anti-scalp cups on each blade
  • 6" (15.3 cm)
  • 76" (193 cm) with ROPS | of Cut: 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm)
  • 116" (295 cm)
  • 71.8” (182 cm)
  • 72.5" (184 cm)
  • 59.5" (151 cm)
  • 68" (173 cm)
  • 11 U.S. gal. (41.6 L)
  • 3.5 U.S. gal. (13.2 L)
  • 6.5 U.S. qt. (6.2 L)
  • 2,110 lbs. (957 kg) with cutting units
  • Blade Style/Type: Rotary | Number of Blades: 3 | Hydraulic Fluid Type: Toro PX™ Extended Life Hydraulic Fluid | Interlocks: Traction pedal, operator presence in seat, PTO engage or disengage, and cutting deck mow or transport safety interlock switches. Parking break set prohibits movement through traction pedal. | Cutting Unit Type/Configuration: Two heat-treated blade segments per spindle, bolted to integral fan disc. Single pilot blade for the overlap between the two main blade assemblies.
  • 10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5" (3.8 cm) square x 0.25" (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16" (0.48 cm) high-strength steel and 10-gauge exterior channels.
  • Description: Rear-mounted, cross flow 4-row radiator
  • Two-piece premium commercial two-tone grey vinyl with two armrests, fore/aft adjustmen