2018 Meyer Manufacturing Corporation 9100 RT BOSS Truck / Cart Mount 9124RT

Information

2018 Meyer Manufacturing Corporation 9100 RT BOSS Truck / Cart Mount 9124RT

The Meyer 9100 RT BOSS Rear Unload is available for straight truck or chassis/cart mount applications. This productive box features a hydraulic dual geardrive design for fast, safe and efficient transport and discharge of your product. Stainless steel sides, poly floor, gate delay and LED lighting are all standard equipment.

Features may include:

9100RT Upgrades

The 9100RT BOSS Series is based on a similar design to our 8100RT Series with these upgrades:

    Dual hydraulic geardrive - Stainless steel side panels - Reinforced, enclosed side frames, Marker & clearance lighting and Standard rear gate delay!
    Trailer Mount applications available in 24, 26, 30 & 36' lengths. Tandem 24/26/30' - Tridem 30/36'
    Truck Mount versions available in 24, 26, 28, 30 or 32' lengths. Big Time Capacity!
    FAST - STABLE - SAFE unloading of your materials - NO HOIST!
    HD fully welded frame @ 16" centers to handle heavy loads while maintaining a low center of gravity.
    Dual Hydraulic Geardrive System offers efficient, fast unloading with NO ROLLER CHAINS / big 2 3/8" driveshaft!
    Stainless Steel side panels provide practicality, corrosion resistance and good looks!
    Solid poly floor - high molecular virgin (not reground)!
    Reinforced, enclosed side frames - marker & clearance lights with DOT tape standard
    Top Pivot gate standard
    Integrated dual front viewing window / HD tubular frame front gate assembly
    Farm Name on Sides - Standard
High Gloss urethane paint finish - Sharp!
    Meyer Red is standard
    Electric front to rear or side to side tarp packages available

Photos

Highlights

  • Rimbey, Alberta
  • 2018
  • Meyer Manufacturing Corporation
  • 9100 RT BOSS Truck / Cart Mount 9124RT
  • Upright/Cross Member Construction: 2x2 tubing
  • Available
  • Inside: 98" | Stringer (Truck/Trailer Mount): 33.5"
  • Inside w/out ext: 72" | Inside w/14” ext.: 85.5"

Specifications

  • 2018
  • Meyer Manufacturing Corporation
  • 9100 RT BOSS Truck / Cart Mount
  • 9124RT
  • Utility
  • Rear: 2-3/8" HD SOLID SHAFT
  • Power Source/DIRECT GEARDRIVE: hyd-dual
  • Upright/Cross Member Construction: 2x2 tubing
  • Enclosed Side Frame/Cross Member Union: STD
  • Upright Spacing: 16" on ctr
  • Inside: 24'8"
  • Inside: 98" | Stringer (Truck/Trailer Mount): 33.5"
  • Inside w/out ext: 72" | Inside w/14” ext.: 85.5"
  • 25'9"
  • 102"
  • w/out ext. (Top of Gate): 103.5" | w/14” ext. (Top of Gate): 115.5" | Side no ext: 88.25" | Side ext: 102"
  • Struck level w/out ext.: 1200 Cu. Ft. | Struck level w/14” ext.: 1400 Cu. Ft.
  • Maximum Net Load (off road rating): 27 ton
  • Time (Dependent of Hyd. System): 50 sec
  • Stainless Steel Side Panels | Solid Poly Floor - High Molecular | Rear Gate Delay System *new RT design!! | Automatic Rear Door Unlatch / Latch | Hydraulic Drive | Double Viewing Window in front gate | Rear Transport Lights - LED (new location) | Marker/Clearance Lights (LED) & D.O.T. Tape | Personalized Farm Name on Sides
  • Apron (Pintle): 667XH