2024 Highline AMX850T Towed TMR Feed Mixer Dogleg

Information

2024 Highline AMX850T Towed TMR Feed Mixer Dogleg

Simple. Reliable. Cost Effective.

Highline® Manufacturing is focused on ensuring the equipment we offer is part of a complete solution to feeding livestock in the most efficient and effective way possible.

The AccuMix™ AMX 850T Towed TMR Feed Mixer is another tool in our lineup that is simple, reliable and cost effective.

Features may include:

Twin Vertical Mixing Screws
  • Each screw comes standard with 5 knives installed, and mounting for 10 knives max.
Dividers
  • Prominent dividers in the tub means minimal mixing dead spots with exceptional clean out.
Hubs
  • Heavy duty 10 bolt hubs.
Axles and Tires
  • Dual axles and high flotation tires (550/45-22.5 16 ply) are standard equipment to meet the extremes of North American weather.
The Mix
  • Excellent mix consistency throughout the load.
Unload Door
  • An industry leading 58” wide front unload door for fast and even feed delivery. The larger door means fewer tractor stops and an optimal clean out.
Conveyors
  • Three different conveyor options available to meet your needs - Hydraulic Fold, Dogleg and Flat.

Photos

Highlights

  • Rimbey, Alberta
  • 2024
  • Highline
  • AMX850T Towed TMR Feed Mixer Dogleg
  • Available
  • Unload Door: 58" (1473 mm) | Flat Conveyor: 109” (2.77 m)
  • Standard: 114" (2.90 m) | With 10” Extension: 124" (3.15 m) | Unload Dogleg: 50” (1270 mm)

Specifications

  • 2024
  • Highline
  • AMX850T Towed TMR Feed Mixer
  • Dogleg
  • Feed Wagons
  • Minimum: 150 hp (112 kW) | 1000 rpm
  • PTO Drive: 1 ⅜" PTO Yoke, Cat 6 PTO, Shear Protection
  • Single Axle, HD 10 Bolt Hubs or Tandem Walking Beam
  • Single Axle: Two 445/50-22.5 | Tandem Axle: Four 550/45-22.5 20 ply
  • Screw: 33 rpm @ 1000 PTO
  • Standard: 114" (2.90 m) | With 10” Extension: 124" (3.15 m) | Unload Dogleg: 50” (1270 mm)
  • Unload Door: 58" (1473 mm) | Flat Conveyor: 109” (2.77 m)
  • 316" (8.03 m)
  • Wheel: 107” (2.72 m)
  • Tub Capacity / with 10” extension: 745 ft3 (21 m3) / 850 ft3 (24 m3)
  • Max - Single Axle: 17000 lb (At 20 mph) / 7711 kg (At 32 kph), 24000 lb (At 7 mph) / 10886 kg (At 11 kph) | Max - Tandem Axle: 24000 lb (At 20 mph) / 10886 kg (At 32 kph)
  • Unloaded: 20200 lb (9182 kg)
  • Number of Screws: 2 | Weigh System: 4 Point Weighing System
  • Screw: 5/8" (15.9 mm) Steel | Tub Wall: 1/4" (6.4 mm) AR200 Steel | Tub Floor: 3/4" (19 mm) Steel
  • Conveyors Chain with Steel Slats