65 PTO hp (48 kW) or greater with standard ASAE Category II drawbar.
Drive Protection: Slip clutch and over-running clutch
Tubeless Ag Rib Implement: 9.5L x 14 6PR
Operating: 0 to 9 mph (0 to 14.5 kph) | Transport: 20 mph (32 khp)
540 rpm PTO, enclosed gears and four HB belt | Roll: 4 HB V-belt and enclosed gears
Disc: 3000 rpm | Roll: 647 rpm
Hydraulic Swing: Standard (double-acting cylinder) | Operating Position: Side-Pull, Right Side | Standard (double-acting cylinder) | Required Hydraulic Valves: All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Drawbar
Swath: 6 ft. (1829 mm) | Windrow: Adjustable from 3 to 6 ft. (914 to 1829 mm)
Operating: 17' 2" (5.2 m)
Operating: 4' 5" (1.3 m)
17' 7" (5.3 m)
9' 11" (3.0 m)
5' 8" (1.7 m)
Operating: 14' 10" (4.52 m)
9' 2" (2.8 nm)
Skid-Shoes: 0.95 to 3.2 in. (24 to 81 mm)
90 in. (2286 mm)
2 to 10 degrees
10.4 in. (264 mm)
With Header Fully Raised: 17" (432 mm)
3,690 lbs. (1674 kg)
MowMax™ True Modular Disc Cutterbar | ShockPro™ Disc Drive Hub protection system | Chevron-Design Roll Conditioner | Roll Conditioner: Choice of molded rubber or steel rolls | Roll Pressure System: Torsion Bar
Conditioner Intensity: Single crank adjustable roll pressure and two stop bolts to adjust roll gap
Flotation: Vertical and lateral, adjustable springs
Disc Quantity: 7
14 (2 per disc)
Hydraulic: Standard (operated by two single-acting cylinders; master/slave)
