Rimbey Implements LTD

Specifications

• 2022 New Holland Skid Steer Loaders L334
• Year2022
• ManufacturerNew Holland
• Model NameSkid Steer Loaders
• Trim NameL334
• Generic Type (Primary)Implement / Attachment
• Engine
• Engine ManufacturerFPT
• Model IdF5BFL413E B002
• Engine PowerPer SAE J1349 Net: 84 (63) @ 2500 rpm hp (kW) | Per SAE J1349 Gross: 90 (67) @ 2500 rpm hp (kW)
• Engine Torque (rpm)Peak: 282 (383) @ 1400 rpm lb-ft (Nm)
• Bore3.9 (99) in (mm)
• Stroke4.3 (110) in (mm)
• Displacement207.5 (3.4) in3 (L)
• Fuel InjectionHPCR Direct
• AirflowTurbocharged Aftercooled with external EGR
• Operational
• Operating SpeedTravel speed, low range: 7.7 (12.4) mph (km/h)
• Operating ConditionsBreakout force, lift cylinder: 6918 (30.8) lbs (kN) | Breakout force, bucket cylinder: 9323 (41.5) lbs (kN) | Tipping load: 6800 (3084) lbs (kg) | Rated operating load, 50% tip: 3400 (1542) lbs (kg)
• Hydraulics
• Hydraulic Flow24.2 (91.5) gpm (Lpm)
• Maximum PressureRelief: 3450 (238) psi (bar)
• DimensionsRear axle to bumper: 42.4 (1078) in (mm) | Clearance circle rear: 71.2 (1809) in (mm) | Clearance circle without bucket: 56.2 (1428) in (mm) | Angle of departure: 27 degrees | Rollback, bucket on ground: 33 degrees | Dump angle: 48 degrees | Bottom of level bucket, fully raised: 124.2 (3155) in (mm) | Bucket hinge pin: 131.1 (3327) in (mm) | Top of ROPS: 80.4 (2042) in (mm)
• Overall LengthWithout attachment with coupler: 118.9 (3021) in (mm)
• Overall Width73 (1854) in (mm)
• HeightDump reach Max: 30.7 (781) @ 45° in (mm) | Rollback, bucket at full: 85 degrees
• Wheelbase52 (1322) in (mm)
• Ground ClearanceBottom of belly pan: 9.6 (244) in (mm)
• Weights
• Weight, In Running Order9100 (4136) lbs (kg)
• serial numberNMM405241